ARYAS R&D Engineering · Antalya Technopark · 2019

Engineering from
the lab to the field.

In energy, AI and vision systems, IoT and microfluidics, we run R&D projects with industrial companies and universities, supported by TÜBİTAK, TÜSEB and the World Bank.

See our projects R&D partnership

6Funded and commissioned R&D projects5 ongoing, 1 completed

2Commercialised products: the hybrid solar thermal system and Carbon Digit

≥70 tDirect CO₂ reduction per year targeted with SOLARTEX

TRL 8Target: proving, in a real factory, a technology already shown at household scale (TRL 6)

01 — Projects

Projects we run with industry and academia

Every project starts with a real problem at an industrial partner, is backed by national or international funding, and ends with proof in the field.

TÜSEB · C4Ongoing

KAVİSES — The chip that listens for cancer

A microfluidic-chip kit and benchtop device that detects circulating tumour cells (CTCs) without labels, using the acoustic signature of hydrodynamic cavitation.

01Consumable cartridge: micro-orifice geometry optimised through numerical analysis and design of experiments
02Acoustic sensing in passive and active channels; high-sampling-rate data acquisition electronics
03EU IVDR (In Vitro Diagnostic Regulation) classification, ISO 13485 design control and ISO 14971 risk management

Target · TRL 6

A prototype validated in a clinical laboratory setting

Sabancı UniversityProf. Dr. Ali Koşar and team

World Bank · Green IndustryOngoing

SOLARTEX — Low-carbon hybrid solar thermal heating for textiles

We are adapting our hybrid solar thermal technology, already covered by a utility model and a PCT application, to textile washing, and proving the system in a real factory with IoT monitoring, cutting the process heat that comes from fossil fuels.

01Industrial-scale CPC evacuated-tube collector; optical optimisation through ray tracing
02Nano-enhanced heat-transfer fluid and a medium-temperature phase-change material (PCM) buffer
03A three-tier cascade of waste heat, solar and boiler; carbon monitoring with PLC/SCADA and IoT

TRL 6 → 8

Validation in a real factory; target: at least 70 tonnes of direct CO₂ reduction per year

Halmer Tekstil A.Ş.Honaz, Denizli · Sabancı University, SUNUM Nanotechnology Centre

TÜBİTAK · 1501Ongoing

Next-generation machine development in cutting technologies

An industrial R&D project, from design to prototype, aimed at making cutting machines more precise, efficient and automated.

01Mechanical design, finite element analysis and topology optimisation
02Embedded control board and automation software
03Prototype manufacture and performance tests at the partner's facility

CT Kesme Teknolojileri ve Makina San. Tic. Ltd. Şti.

1707 · Commissioned R&DOngoing

Engineering and prototype development for cutting processes

A 1707 Commissioned R&D project for CT Kesme's product development needs, in which our team handles design, analysis and prototyping.

01Needs analysis and technical specification
02Design, simulation and electronics development
03Prototype, validation tests and technology transfer

CT Kesme Teknolojileri ve Makina San. Tic. Ltd. Şti.

1707 · Commissioned R&DOngoing

Automatic quality control with AI and vision systems

A system that inspects products in real time on the production line, using industrial cameras, controlled lighting and AI-based image processing.

01Industrial camera, optics and lighting design
02Deep-learning-based defect detection and classification
03Integration with the line control system (PLC) and on-site commissioning

KANSAN Makineİzmir

TÜBİTAK · 1507Completed

Carbon Digit — Corporate carbon and water footprint platform

Software that turns activity data into Scope 1-2-3 reports aligned with the GHG Protocol and ISO 14064-1. The project is complete; the product is live and on sale.

013,483 emission factors from DEFRA, IPCC, EPA and TurkStat, versioned by year
02Multi-company structure, facility-level boundaries and ISO 14064-1 consolidation approaches
03Blue, green and grey water footprint calculation aligned with ISO 14046

OutcomeCommercialised — live in Turkish and English on a subscription model

ARYAS R&Dcarbondigit.com

Planning an R&D project for your company?Let's talk

02 — References

Institutions we work with

Our industrial partners, academic stakeholders and the institutions that support our projects.

Industry

03Industrial partners

Companies that define the problem and validate the system at their own facility

KANSAN Makine
1707 Commissioned R&DVision systems
Halmer Tekstil A.Ş.
SOLARTEXWorld Bank
CT Kesme Teknolojileri
TÜBİTAK 15011707 Commissioned R&D

Academia

02Universities

Joint research and scientific infrastructure

Sabancı University
KAVİSESSOLARTEX
Akdeniz University
Antalya Technopark

Support

04Supporting bodies

The programmes that fund our projects, and the ecosystem around them

TÜBİTAK
TÜBİTAK 1501TÜBİTAK 1507Carbon Digit
TÜSEB
C4KAVİSES
World Bank
Green IndustrySOLARTEX
Antalya Technopark
Head office

Would you like to join our industrial partners?R&D partnership →

03 — Capabilities

Four fields, one engineering team

Mechanical, mechatronic, software and electronics engineers work at the same table, and we take each job end to end, from concept to field validation.

Energy and decarbonisation

Hybrid solar thermal heating and cooling, industrial process heat, thermal energy storage and waste heat recovery.

CPC collectorPCMHeat pump

AI and vision systems

Deep-learning machine vision, quality control, optical sorting and intelligent decision support from production data.

Machine visionDeep learning

Microfluidics and health technologies

Label-free cell detection using hydrodynamic cavitation, acoustic sensing and test electronics.

Lab-on-chipIVDR

IoT and embedded systems

Embedded board design, PLC/SCADA, IoT energy-water-carbon monitoring and corporate carbon accounting software.

PCBSCADAIoT

04 — Products and ventures

Products born from R&D

We turn the technology we develop in projects into products and software, and grow them in the field and the market.

New · SaaS

CarbonDigit

Scope 1·2·3GHG ProtocolISO 14064-1ISO 14046

Corporate carbon and water footprint software

Turns activity data into audit-ready Scope 1-2-3 reports using 3,483 current emission factors. Developed with the support of TÜBİTAK 1507.

carbondigit.com ↗

Evacuated-tube solar thermal collector mounted on a roof (sample image)

Commercialised · Export

Hybrid solar thermal climate control

A low-carbon system that heats in winter and cools in summer: collector, heat storage, heat pump and smart control working as one.

Request technical information →

System componentsHybrid solar thermal system

Flat-plate solar thermal collectors being installed on a roof (sample image) — Collector installation

An insulated hot water storage tank with pipework (sample image) — Thermal energy storage

A heat pump outdoor unit installed against a building (sample image) — Heat pump integration

A rooftop air handling unit and ventilation ducts (sample image) — Air distribution line

05 — R&D partnership

Let's turn your technology need into a funded project

We design each project with our industrial partners, match it to the right funding programme, run the development and prove the result in the field.

01
Need and feasibility
We define the production problem, technical targets and success criteria together.
02
Programme and consortium
We pick the right route from TÜBİTAK 1501, 1507 and 1707 Commissioned R&D, TÜSEB or international funds, and prepare the application.
03
Development and prototype
Our own team handles design, simulation, electronics, embedded software and prototype build.
04
Field validation
We test and measure the system at our partner's site and get it ready for commercialisation.

TÜBİTAK 1501
TÜBİTAK 1507
TÜSEB
1707 Commissioned R&D
World Bank Green Industry

Share your project idea

06 — About us

From the technopark to the factory floor

Founded in Antalya in 2019, ARYAS R&D Engineering brings mechanical, mechatronic, software and electronics engineering under one roof. Our head office is at Akdeniz University Antalya Technopark and our branch is at Pamukkale Technopark in Denizli, and from both we bring university–industry collaboration together with disciplined project management.

We protect the technologies we develop through utility model and international PCT applications, then commercialise them for Turkish and international markets.

Engineers working at computers, with a 3D mechanical model on one screen (sample image)

TeamFounder, partners and project team

Dr. Yavuz SümerFounder · Project leadSolar thermal and electronic system design
Zeki Furkan DurumSoftware Developer · Project PartnerSoftware development, product strategy & R&D projects

07 — Contact

Let's build the next project together

Email: info@aryasarge.com
Phone: +90 541 813 53 41 · Yavuz Sümer
Head office: Akdeniz University Antalya Technopark, R&D 2 Uluğbey Building No: 3A/31, Pınarbaşı Mah. Hürriyet Cad., Konyaaltı / Antalya, Türkiye
Denizli branch: Pamukkale University Technopark, Kınıklı Mah., Pamukkale / Denizli, Türkiye
Hours: Monday – Friday · 09:00 – 18:00

Head office · Antalya Technopark

Branch · Pamukkale Technopark, Denizli

Send an email

Engineering fromthe lab to the field.